Just opened this up to give it a good cleaning, looked like someone puked on top of it and it seeped inside. All better now. To clean this bad boy I sprayed it with a mix of Simple Green and water (25-75), scrubbed it with a...

Taking a break from the "massive project" to bend an old Mr. Mike some dude sent over.. here are the first couple of bends I've found.. I also found a master pitch control.. will post more when I get it finished. UPDATE 10.07.11 Shipped back to his...

This is a Casio SA-20 I was recently commissioned to bend by Joe Diliberto of Tonal Eclipse Productions. When it came to me it had an RCA patch bay that I knew couldn't possibly function and oh was I right. It has all the same...

Now offering Alesis Hr-16 button and battery repair service. This is a must for anyone who has an older HR-16 that will not hold patterns or has buttons that do not function properly. Breathe new life into your old HR-16 for the low price of...

I got the Korg back together today and the buttons are all working 90% better.. the open hi-hat is a little unresponsive at times, so when I take it back apart to bend I'll be sure to address that. The terrible buzz and hum is...

Just picked up a Korg DDM-110 from a friend. The buttons are pretty beat on the inside, either you get nothing or you get multiple hits. It also sounds like there is a grounding problem that will need to be fixed. So it ...

                  Looks like someone poured a coke on top of this bad boy, dust bunnies have invaded as well. Time to give this board a good cleaning. Normally I would not hesitate to bust out the WD-40 for this job, but the "buttons" are actually plastic...