Field Supplies for Sound Exploration
I got the Korg back together today and the buttons are all working 90% better.. the open hi-hat is a little unresponsive at times, so when I take it back apart to bend I’ll be sure to address that. The terrible buzz and hum is gone after a nice Simple Green washdown. I’m thinking someone … Read more
I made this image a few years ago when I was working on a Roland TR-505 for Igor Amokian, at the very least it should point you in the right direction if you have one of these but are hesitant to open it up. It has tons of bend points, I recommend doing a break … Read more
Looks like someone poured a coke on top of this bad boy, dust bunnies have invaded as well. Time to give this board a good cleaning. Normally I would not hesitate to bust out the WD-40 for this job, but the “buttons” are actually plastic switches … Read more
Just picked up a Korg DDM-110 from a friend. The buttons are pretty beat on the inside, either you get nothing or you get multiple hits. It also sounds like there is a grounding problem that will need to be fixed. So it is going on the bench, and we will see if I can … Read more